$166.99
Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way.
- Unique internal arrangement with face-bearing clutch stopper
- WTP Patented "Tri-Point" friction system
- Hub Drilling: 32
- Cassette Body Type: Single Cog Driver
- Axle Size: 14mm
- Spoke Interface: J-Bend
$149.90
- Produced by one of Japan's oldest hub makers
- Silky smooth Japanese sealed cartridge bearings
- High polished finish
- Choose fixed/free or fixed/fixed flip-flop rear hub
- Hub spacing: 120mm OLD
$86.72
- HG-splined 8-10sp cassette hub with 70mm drum brake
- A356 aluminum hub shell with 10mm solid axle (175mm overall axle length)
- Cassette and brake lever sold separately
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$219.99
- An oversized hub shell increases torsional and lateral stiffness
- 6902 bearings for maximum durability
- Wide bearing placement was designed to decrease load on the bearings
- Low-drag labyrinth seals
- Tool-free endcaps
- Torque-cap compatible
- Includes standard 15mm end-caps only, Torque must be purchased separately
$379.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$196.99
- Elite Series convertible cyclocross/gravel hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Use: Front Hub
- Bearing: Sealed
- Drilling: 28H
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- OLD: 100mm
J-Bend Spoke:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull Spoke:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$165.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Bearing: Sealed
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 27.65mm
Quick Release:
- Weight: 246g
- LTF-R: 24.85mm
- CTF-L: 39.85mm
- CTF-R: 42.65mm
15mm Thru-Axle:
- Weight: 256g
- LTF-R: 27.65mm
- CTF-L: 47.35mm
- CTF-R: 47.35mm
$259.99 - $269.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
Quick-Release:
- LTF-L: 48.65mm
- LTF-R: 48.65mm
- CTF-L: 36.5mm
- CTF-R: 36.5mm
12mm Thru-Axle:
- LTF-L: 52.15mm
- LTF-R: 52.15mm
- CTF-L: 46.5mm
- CTF-R: 46.5mm
$39.99
- Aluminum hubs
- Loose ball
- Bolt-on
- Axle: B/O 3/8
- Material: Aly
- Color: Blk
- Brake Type: 6B
- OLD: 135mm
$52.99
- Aluminum hubs
- Loose ball
- Bolt-on
- Axle: B/O 3/8
- Material: Aly
- Color: Blk
- Brake Type: 6B
- OLD: 170mm
$196.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6-bolt disc brake rotor compatible
- Sealed bearings
J-Bend SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 58mm
- Right Flange Diameter: 45mm
- Left Locknut-To-Flange: 27.05mm
- Right Locknut-To-Flange: 15.05mm
- Left Center-To-Flange: 27.95mm
- Right Center-To-Flange: 39.95mm
Straight-Pull SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 55mm
- Right Flange Diameter: 55mm
- Left Locknut-To-Flange: 31.5mm
- Right Locknut-To-Flange: 19.5mm
- Left Center-To-Flange: 23.5mm
- Right Center-To-Flange: 35.5mm
$165.99 - $196.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Wt: 180g
J-Bend:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$70.39 - $70.99
- Aluminum hub body
- Sealed bearings
- 100mm OLD
- 6-bolt disc rotor mount
$92.79
- Forged aluminum construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc rotor compatible
- 8/10-speed cassette compatibility
- Quick-release
- 135mm hub spacing
$79.99
- Aluminum hub body
- Sealed bearings
- 6-bolt disc rotor mount
- 15mm thru axle
- 78 x 15mm version: flush axle, no end caps
$139.99
- Forged alloy construction
- Sealed Cartridge bearings
- Double contact seals
- 6-bolt disc
- 12x142mm rear spacing
- Aluminum hub body
$139.99
- Aluminum alloy shells resist corrosion and provide lightweight longevity
- Sealed cartridge bearings offer smooth operation while resisting contaminants
- Thru axle design with 8-10 speed cassette and XD drivetrain options
- Brake Type: 6B
$79.99
- Aluminum hub body
- Sealed bearings
- 6-bolt disc rotor mount
- 15mm (See MT-3100) or 20mm thru-axle
- 32 or 36-hole spoke drilling
$59.99
• 8-speed cassette compatibility
• 28-hole spoke drilling
• Quick-release
• Aluminum hub body
• Black
$269.99
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/QR Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 32.75mm
LTF-R: 50.05mm
CTF-L: 34.9mm
CTF-R: 17.6mm
Straight Pull Spoke/12mm Thru-Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 36.25mm
LTF-R: 53.55mm
CTF-L: 34.9mm
CTF-R: 17.6mm
J-Bend Spoke/QR Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 32.65mm
LTF-R: 48.2mm
CTF-L: 35mm
CTF-R: 19.45mm
J-Bend Spoke/12mm Thru-Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 36.15mm
LTF-R: 51.7mm
CTF-L: 35mm
CTF-R: 19.45mm
$119.99
- Elite Series road hubs
- Straight pull and J-bend spoke options
- Sealed bearings
Straight Pull Spoke:
PCD-L: 30.3mm
PCD-R: 30.3mm
LTF-L: 13.1mm
LTF-R: 13.1mm
CTF-L: 36.9mm
CTF-R: 36.9mm
J-Bend Spoke:
PCD-L: 31mm
PCD-R: 31mm
LTF-L: 10.78mm
LTF-R: 10.78mm
CTF-L: 39.22mm
CTF-R: 39.22mm
$249.99
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm
$62.99
- High-quality road hub with 1-piece forged and CNC machined alloy body
- Sealed bearings for increased performance and contamination resistance
- 7075AL machined axle
Specifications:
- Use: FT
- Spacing / Axle: QR
- Material: Alloy
- Weight: 79g
- Brake Type: RIM
- Bearing Type: Sealed
$58.99
• Aluminum hub body
• Quick release
• 100mm OLD
• 20, 24, 28, 32, and 36-hole spoke drilling
• Black or Silver
$79.99
- Machined and forged alloy construction
- Sealed cartridge bearings
- Lightweight design
- 8/10-speed cassette
- Quick-release
- 130mm hub spacing
- Black or silver
$56.99
Sealed cartridge bearing
High flange design w/cut outs
100mm OLD
Lightweight, hollow, heat-treated axle
Black, silver, or white
32 or 36-hole spoke drilling
$69.99
• Sealed cartridge bearings
• High flange design
• 120mm hub spacing
• Lightweight, hollow, heat-treated axle
• Fix/fix hub threading
• 32 and 36-hole spoke drilling
• Bolt-on 3/8-inch axle
• Black, silver, and white
Page 1 of 2
Next page