Brake pad spreader tool for Avid Elixir brakes.

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever

SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, and Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - NOT compatible with RockShox fork bleed kit - Brake fluid sold separately

Contains the fittings and syringes needed for bleeding Campagnolo disc brakes -Does not include mineral oil - Fits Brand: Campagnolo - Hydraulic Fluid Type: Mineral Oil

- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications

Campagnolo UT-CN400 Chain Tool. - Used to install 12-speed and 13-speed Campagnolo chains

- 11 speed compatible - Allows removal, installation and peening of rivets

Service kit for Cane Creek suspension forks.

- Cable Tie Gun quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts, and abrasions to cables - Automatically cuts off excess strap when the selected tension setting is achieved and saves installation time with one easy pull of the trigger

- The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets. - The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore. - The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm sizes and include a tool roll for organized shop use and travel.

- Installation wrench for all Enduro TorqTite Bottom Brackets - Some TorqTite installations require two wrenches

- This tool allows you to swap out the chain rings on Cannondale cranks by removing the spider.

- Installation and removal tool for press fit BB86 and BB92 bottom brackets

- Compatible with most 5-to-12 speed chains - Go/no-go gauge indicates 0.75% wear - Reverse side also functions as a chain hook

- All the brushes you need to detail your bike like a pro - Large, ergonomic handles feature an EasyGrip inlay - Tapered brush with soft bristles gets in all the tight, hard-to-reach spots - DuoBrush combines sponges and soft bristles—great for frames and tires - Gear cleaning brush with 3 brush heads makes quick work of drivetrain cleaning

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

- Single 29mm open bore drift for use with 1/2" rods

- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane creek, TH/FSA) - Includes inside gauges for headtubes and cups and outside gauges for bearings

- Installs and removes threaded cups for 386Evo cranks

- Star nut threads onto driver. - Driver slides up into guide tube - Guide tube fits over outside of 1-1/8" steerer - Hammer on round end of driver until steerer contacts driver-stop - Star nut is properly aligned and seated a consistent depth

Regular chain and component cleaning is a chore no more with Finish Line's Starter Kit 1-2-3. It starts with Finish Line's popular Multi Degreaser for cleaning, and their versatile Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too. Then, after cleaning, get your bike running smoothly and silently again with the included Finish Line Dry Teflon lube and you're good to go!

This ergonomically designed grease gun delivers comfortable precision lubing. With one-hand operation and a long-reach tip, it's an easy, clean, quick way to get the slippery stuff where you want it. It screws onto all standard tubes of grease with 9/16-inch heads (sold separately).

- Proper belt tension is critical to maintain optimum drive operation (low tension causes belt to skip on teeth, high tension causes excessive wear on belts, cogs and sprockets) - Tool gauges proper tension using a visual red/green indicator - It is recommended to rotate the drive and recheck tension several times around circumference of belt

- Pad/rotor alignment tool, helps set up pad gap on all Hayes brakes

- Highly rated tool for tensioning a cable while pinch bolt is tightened

- Professional quality drop-forged chrome vanadium steel - 15mm on both ends - Double-ended wrench with one 90 degree jaw and one straight jaw

- Shop grade steel cable/housing/spoke cutter with comfort grip - Cuts brake housing without crushing the coiled steel reinforcement

- Shop-grade tool prevents the cassette from spinning while removing the lockring - Can also be used to separate cogs on threaded multi-speed freewheels (two removers needed) - Comfort grip vinyl-coated handle

- Double-ended socket wrench with reversible ratchet mechanism - Long handle with soft non-slip rubber grip - 14 and 15mm sockets